MIL-V-48190 (AR)
DRAWINGS
ORDNANCE CORPS
8808362 - Packing and Marking for Storage
and Shipments
8853791 - Vent Assembly
8853792 - Cap Assembly
8853794 - Retainer
8853795 - P lug
8853797 - Gasket
8853798 - Washer
8883535 - Bag, Packing, for Repair Parts
ET-8853791 - Equipment Tabulation
(Copies of specifications, standards, drawings, and publica-
tions required by suppliers in connection with specific
procurement functions should be obtained from the procuring
activity or as directed by the contracting officer.)
3.
REQUIREMENTS
3.1 Materials. The contractor shall furnish objective
evidence (see 6.2) that the material complies with the speci-
fications listed on the applicable drawing.
3.2 Assembly. The vent assembly shall comply with
all requirements specified on the drawing (dwg) 8853791, with
all requirements specified herein, and with the requirements
of all applicable specifications to the extent specified on
the drawing and herein.
3.3 Workmanship.
3.3.1 Plastic and metal characteristics. All compo-
nents shall be free from cracks, splits, cold flow, shrinkage,
cold shuts, inclusions, porosity, or any similar characteristic.
3.3.2 Threads. Threads shall be full and undamaged
for the entire minimum length or depth as required on the
applicable drawing.
3.3.3 Burrs. Parts shall be free from burrs.
3.3.4 Foreign matter. Parts shall be free from chips,
dirt, grease, rust, corrosion, or any embedded foreign ma-
terial.
3.3.5 Cleaning
The cleaning method shall not be in-
jurious to any of the parts. nor shall the parts be contaminated
by the cleaning agent.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business